Aeroo Pro Firmware Update Information

  1. Confirm which controller you have and WaveSync version*
  2. Check the table and find the updates that match your setup
  3. Follow the instructions to ensure you're up-to-date
  4. If you have any problems with updating, check the Troubleshooting section below

* Smart Controller has a built-in screen; the Standard Controller does not. WaveSync version is written on the back of your controller.

Version Table

Aeroo Fly Smart Controller – Built In 1.8.1 28 Dec 2025
iPhone – App 1.2.4.2 27 Dec 2025
Android – App 1.7.9 27 Dec 2025


Controller Smart – Power System HT55_RS 0.0.4.1 10 Jan 2026
Smart – Operating System HT55.AEROO V20260109 9 Jan 2026
Standard V-factory / v1.0.1 n/a


Aircraft Aeroo Pro – WaveSync 2.0 1.0.8 3 Jan 2026
Aeroo Pro – WaveSync 1.0 1.0.3 3 Jan 2026


Battery Smart Battery BAT-F07_V2.1.2 30 May 2025

Instructions

Aeroo Fly App

  1. Visit the App Store (iPhone) or Play Store (Android) on your mobile device.
  2. Search for Aeroo Fly.
  3. If any update is available, it should be prompted in the app description.
  4. The update version is displayed in small writing under your User Profile (click the head icon on the blue home screen).

Smart Controller

Operating System

  1. Power ON your Smart Controller only.
  2. Ensure your Smart Controller is connected to a strong WiFi network. Wait on the home screen (blue with rocks) for a black box to appear with the text "Find an OTA upgrade package!"
  3. Follow the on-screen steps to complete the update. The remote will restart and the update takes 5–10 minutes.
  4. Once complete, restart. The updated version is displayed under Settings > General > Version > Controller.
  5. If no update pop-up appears, check the troubleshooting guide below.

Note: Please charge to at least 50% battery to complete successfully.

Power System

  1. Power ON your Smart Controller only.
  2. Ensure your Smart Controller is connected to a strong WiFi network.
  3. Proceed to the main flight interface. A black (semi-transparent) box will appear prompting you to update the remote control firmware.
  4. Follow the on-screen steps to complete the update, then restart.
  5. Once complete, the updated version should be displayed under Settings > General > Version > Controller.

Note: Please charge to at least 50% battery to complete successfully.

Aeroo Fly

  1. Power ON your Smart Controller only.
  2. Ensure your Smart Controller is connected to a strong WiFi network.
  3. Proceed to Select Device and then Enter Device. When pressing "Enter Device", a white update box should appear.
  4. Follow the on-screen steps. For your first time updating, you will need to select Allow unknown app update. This is inherent with the Android operating system and designed to protect your privacy.
  5. Once complete, restart. The updated version should be displayed under Profile (on the home screen) > below your account details (bottom left).

Note: Please charge to at least 50% battery to complete successfully.

Aircraft

  1. Power on the controller. Ensure your mobile device or Smart Controller is connected to a strong WiFi network.
  2. Power on the drone. Click Enter Device to proceed to the main flight interface.
  3. Wait 30 seconds. A black (semi-transparent) pop-up will appear advising a new update is available.
  4. Follow the steps as prompted.
  5. Once complete, you must restart. The updated version can be seen under Settings > General > Version.
  6. If no update pop-up appears, check the troubleshooting guide below.

Note: It is not uncommon for this update to get stuck on a certain percentage for 20 minutes or more. Please be patient and allow the update to complete. Some newer Aeroo Pro models have WiFi Fast Transfer and will be able to complete the update more quickly.

Troubleshooting

If you are not being prompted to update, or if you are having issues completing an update after following the above steps, please try the following:

Clear the Cache

In the Aeroo Fly Interface Home Screen (blue screen with rocks), click the profile icon in the top right. Then press Clear Cache. Restart and follow the above steps again.

Confirm Good Internet Connection

Your WiFi may be too slow or weak to successfully download or complete the update. Please try other networks if available, such as a personal hotspot or other modem/frequency.

Ensure Everything is Fully Charged

Most updates require at least 50% battery life. Please ensure everything is fully charged — including your device, controller, and drone battery — before updating, and try again.

Release Notes

10 Jan 2026

New sleep mode enabled (short press power button). Charging while controller is in use is optimised. Audio volume increased for in-flight prompts.

9 Jan 2026

Minor Operating System fix.

3 Jan 2026

Optimised self-check process on startup. Addresses Gimbal Error Messages seen on startup.

1 Jan 2026

Introduces Fast Charging Indicator. Charging efficiency is improved. WiFi stability settings optimised.

27/28 Dec 2025

Battery Activation is no longer required. Resolves minor error messages related to RID and Barometer. Battery indicator is more clear. USB is disconnected error resolved. Optical flow error resolved. Other optimisations to the app interface.

30 May 2025

Optimised discharge protocol for improved flight time.